tag:blogger.com,1999:blog-3566761040763885641.comments2023-10-10T10:40:52.687-08:00Motorcycling the Last FrontierAK-VStromhttp://www.blogger.com/profile/12910944324990561810noreply@blogger.comBlogger33125tag:blogger.com,1999:blog-3566761040763885641.post-61915610486978957442023-04-27T01:17:50.880-08:002023-04-27T01:17:50.880-08:00This comment has been removed by the author.Lynne Allenhttps://www.blogger.com/profile/18104010002188937732noreply@blogger.comtag:blogger.com,1999:blog-3566761040763885641.post-60063246884178481712021-04-03T08:40:07.218-08:002021-04-03T08:40:07.218-08:00You should consider size, color, scale, function a...You should consider size, color, scale, function and wattage. Even your own height is important! Your choice of table lamp depends on what you want the lamp for. <a href="https://lampeee.com/" rel="nofollow">Table Lamp</a><br /><br />Seo Leenahttps://www.blogger.com/profile/17490936196427284120noreply@blogger.comtag:blogger.com,1999:blog-3566761040763885641.post-35538550712263545332020-10-21T01:05:56.756-08:002020-10-21T01:05:56.756-08:00cnc machining
cnc machining china<a href="https://stbomei.com/" rel="nofollow">cnc machining</a><br /><a href="https://cncinchina.com/" rel="nofollow">cnc machining china</a>yifanhttps://www.blogger.com/profile/09829065261097018904noreply@blogger.comtag:blogger.com,1999:blog-3566761040763885641.post-85803350946945611662020-07-17T00:08:38.863-08:002020-07-17T00:08:38.863-08:00Thank you so much for such an informative piece of...Thank you so much for such an informative piece of information :) <br />If anyone interested similar one's have a look here<br /><a href="https://themotorbiker.com/best-motorcycle-grips/" rel="nofollow"> the motorbiker </a><br /><br />ThanksAsh Greenhttps://www.blogger.com/profile/08519755274603203829noreply@blogger.comtag:blogger.com,1999:blog-3566761040763885641.post-87015873943128025702018-12-30T15:16:26.737-09:002018-12-30T15:16:26.737-09:00THANK YOU THIS! I have spent days trying to figure...THANK YOU THIS! I have spent days trying to figure out how the hell to get that lower bearing sleeve off. A freaking hammer to pry it out.. Unbelievable! Haha, Thanks again!A Penny for Cody's Thoughts...https://www.blogger.com/profile/12825295209721746578noreply@blogger.comtag:blogger.com,1999:blog-3566761040763885641.post-83618490766948383952018-12-07T19:36:23.376-09:002018-12-07T19:36:23.376-09:00Really nice and informative blog, keep it up buddy...Really nice and informative blog, keep it up buddy…Thanks for sharing.<br /><a href="https://www.clippingsolutions.com" rel="nofollow">clipping path service</a><br /><br /> <a href="https://www.clippingsolutions.com/photoshop-retouching-service.html" rel="nofollow">Photo Retouching Services</a><br /> <a href="https://www.clippingsolutions.com/raster-to-vector-conversion-service.html" rel="Clipping Solutionshttps://www.blogger.com/profile/16126945506709626936noreply@blogger.comtag:blogger.com,1999:blog-3566761040763885641.post-23108993925263022272018-10-08T22:27:04.398-08:002018-10-08T22:27:04.398-08:00Very helpful information!Thank you so much for the...<br />Very helpful information!Thank you so much for the detailed article<br /><br /> <a href="https://www.clippingsolutions.com" rel="nofollow">clipping path service</a><br /><br /> <a href="https://www.clippingsolutions.com/photoshop-retouching-service.html" rel="nofollow">Photo Retouching Services</a><br /> <a href="https://www.clippingsolutions.com/Clipping Solutionshttps://www.blogger.com/profile/16126945506709626936noreply@blogger.comtag:blogger.com,1999:blog-3566761040763885641.post-37091629899331711562018-01-02T14:00:17.918-09:002018-01-02T14:00:17.918-09:00Hey, sorry to take so long to reply! It's bee...Hey, sorry to take so long to reply! It's been about two years since I last opened up the carbs, but I don't remember seeing a check ball or spring in mine. About the best recommendation I can make -- assuming you haven't sorted it out already -- is to ask on the Yamaha Triples forum (yamaha-triples.org) or Facebook group. If you can't get a good answer there, you can search AK-VStromhttps://www.blogger.com/profile/12910944324990561810noreply@blogger.comtag:blogger.com,1999:blog-3566761040763885641.post-46674046499186253802017-10-22T06:39:58.641-08:002017-10-22T06:39:58.641-08:00I'm sure there's no way you check this any...I'm sure there's no way you check this anymore, but I'm rebuilding those Mark I's right now and from two of the three, a tiny spring and ball fell out. I don't have any idea where from, I checked for that sort of thing carefully and then they fell out while I was disassembling them anyway. Any advice or help would be amazing. The third one didn't seem to have this check Anonymoushttps://www.blogger.com/profile/12409249869343627061noreply@blogger.comtag:blogger.com,1999:blog-3566761040763885641.post-31801084068298749142017-06-10T10:08:52.294-08:002017-06-10T10:08:52.294-08:00No problem. Glad the post was helpful, and good l...No problem. Glad the post was helpful, and good luck with your install!AK-VStromhttps://www.blogger.com/profile/12910944324990561810noreply@blogger.comtag:blogger.com,1999:blog-3566761040763885641.post-23282188663204245322017-06-10T03:23:45.176-08:002017-06-10T03:23:45.176-08:00Thanks Mike, I'm about to buy a pair of these ...Thanks Mike, I'm about to buy a pair of these Oxford grips so your discussion on fitting them is very helpful so I know what to expect before I start fitting them. cheers<br />StanStanhttps://www.blogger.com/profile/03109382835184998996noreply@blogger.comtag:blogger.com,1999:blog-3566761040763885641.post-61403215716196955182014-08-17T08:41:56.526-08:002014-08-17T08:41:56.526-08:00Hi Robert. Wanted to say thanks v much for this p...Hi Robert. Wanted to say thanks v much for this post. I just installed the SW racks on my 2011 650. Your instructions worked great. On the tail lights I had one bonus in that I did not need to cut the wires. I simply unplugged the connections on both sides, took off some white electrical tape holding the wire bundles together, then was able to thread each tail light wire between the brake Anonymoushttps://www.blogger.com/profile/13134725476728018217noreply@blogger.comtag:blogger.com,1999:blog-3566761040763885641.post-80684427742336048252014-08-17T08:40:37.732-08:002014-08-17T08:40:37.732-08:00This comment has been removed by the author.Anonymoushttps://www.blogger.com/profile/13134725476728018217noreply@blogger.comtag:blogger.com,1999:blog-3566761040763885641.post-88829336756754014632013-12-21T00:56:46.753-09:002013-12-21T00:56:46.753-09:00Hi Kurt,
I installed them long enough ago (3 1/2 ...Hi Kurt,<br /><br />I installed them long enough ago (3 1/2 years?) that I don't remember for certain, but I think it was about 2 - 3 hours -- an easy afternoon, at any rate.AK-VStromhttps://www.blogger.com/profile/12910944324990561810noreply@blogger.comtag:blogger.com,1999:blog-3566761040763885641.post-61757764851342587502013-12-20T20:42:49.025-09:002013-12-20T20:42:49.025-09:00Hey Mike,
How long do you think this entire instal...Hey Mike,<br />How long do you think this entire install took you? Your fotos and instructions are great - I'm just trying to make sure I leave enough time!Kurthttps://www.blogger.com/profile/04705266339821930423noreply@blogger.comtag:blogger.com,1999:blog-3566761040763885641.post-12971365104143054132013-10-23T10:12:12.935-08:002013-10-23T10:12:12.935-08:00Indeed I am, using the same name as here. I just p...Indeed I am, using the same name as here. I just posted what I think is a pretty cool video of a XS750 carb rebuild. Check it out if you're so inclined:<br /><br />http://youtu.be/ow8H-OCp9HcAnonymoushttps://www.blogger.com/profile/07158724098793319604noreply@blogger.comtag:blogger.com,1999:blog-3566761040763885641.post-37059296381747922732013-10-17T07:30:59.396-08:002013-10-17T07:30:59.396-08:00Hi, and thanks for reading! Best of luck on your ...Hi, and thanks for reading! Best of luck on your XS project, and be sure to drop by from time to time with an update :)<br /><br />Out of curiosity, are you a member on the Yamaha Triples forum (yamaha-triples.org)? I've found a lot of help and inspiration for my build there, so if you aren't on there already, I would encourage you to drop by. The forum itself is a little funky :) but AK-VStromhttps://www.blogger.com/profile/12910944324990561810noreply@blogger.comtag:blogger.com,1999:blog-3566761040763885641.post-8524929529196554302013-10-16T09:58:38.041-08:002013-10-16T09:58:38.041-08:00I've read all of your XS750 posts, great work!...I've read all of your XS750 posts, great work! They are inspiring me to get moving on my XS project, and I hope to have it running before 2014. Anonymoushttps://www.blogger.com/profile/07158724098793319604noreply@blogger.comtag:blogger.com,1999:blog-3566761040763885641.post-57663466590362321742013-05-22T19:30:50.908-08:002013-05-22T19:30:50.908-08:00LED lights has a low power consumption and long an...<a href="http://www.ledlightshub.com" rel="nofollow">LED lights</a> has a low power consumption and long and predictable lifetime.The lifetime of LED street lights is usually 10 to 15 years, three times the life of current technologies adopted. LEDs also have low maintenance cost.Anonymousnoreply@blogger.comtag:blogger.com,1999:blog-3566761040763885641.post-18572897459906636012013-05-16T21:02:28.213-08:002013-05-16T21:02:28.213-08:00Thanks...I'm certainly collecting a pretty com...Thanks...I'm certainly collecting a pretty comprehensive of list of ideas that didn't work, lol.AK-VStromhttps://www.blogger.com/profile/12910944324990561810noreply@blogger.comtag:blogger.com,1999:blog-3566761040763885641.post-89580561286064964052013-05-16T20:10:55.401-08:002013-05-16T20:10:55.401-08:00nice blog with some nice informationpowersport Cal...nice blog with some nice information<a href="http://www.powersportsindustries.com" rel="nofollow">powersport California</a>Anonymoushttps://www.blogger.com/profile/09902182513512668094noreply@blogger.comtag:blogger.com,1999:blog-3566761040763885641.post-54538746165900344782013-03-29T15:53:16.205-08:002013-03-29T15:53:16.205-08:00Hmmm...I didn't see a comment on G+, but I don...Hmmm...I didn't see a comment on G+, but I don't check it *every* day. Anyway, I have yet to run the bike -- it's still significantly disassembled -- so if you are asking if the jetting was right with the pod filters, I couldn't tell you. However, if you are asking about whether the kit contained the right parts for a stock configuration, yes, it looks like it. I'll try to AK-VStromhttps://www.blogger.com/profile/12910944324990561810noreply@blogger.comtag:blogger.com,1999:blog-3566761040763885641.post-78301863102411525932013-03-28T13:33:59.212-08:002013-03-28T13:33:59.212-08:00DRT...
DRT...<br />Captain.Grizhttps://www.blogger.com/profile/06466632431576953648noreply@blogger.comtag:blogger.com,1999:blog-3566761040763885641.post-66420421310249550892013-03-16T12:26:37.521-08:002013-03-16T12:26:37.521-08:00Hi Mike. I tried to contact you on G+ but wasn'...Hi Mike. I tried to contact you on G+ but wasn't sure if you check that a lot. I'm working on the motorcycle as you are..an XS750 and it looks like I have the Mikuni Mark 1 as well. I just wanted to ask if the jets supplied in the K&L kit that you linked to worked out? I'm thinking of buying the kit but wanted to double check before I do..<br /><br />Thanks!Anonymoushttps://www.blogger.com/profile/06867177433921460319noreply@blogger.comtag:blogger.com,1999:blog-3566761040763885641.post-77047193460079637262012-10-30T01:01:39.536-08:002012-10-30T01:01:39.536-08:00Thank you again for another” feel good, uplifting,...Thank you again for another” feel good, uplifting, that there are good people in this world story”. We read so many stories that are negavite about people and what they do to others. A random act of kindness is always such a great thing to hear about. Peace and blessings.<br /><br /><a href="http://www.pisces-aqua.co.uk/" rel="nofollow">Abs Pipe</a><br />Rakesh Roshanhttps://www.blogger.com/profile/08661912007010248184noreply@blogger.com